Rexroth GFT Travel Reducer with compact high speed travel drive is a ideal speed reduce part in the rotation mechanism.
Rexroth GFT Hydraulic Travel Reducer with compact high speed travel reducer is a ideal high speed travel driver reduce part in the rotation mechanism, Due to its compact structure, it could be used in the severely hard installation conditions, The advanced designs as well as the process technology guarantee the high bearing capacity and the operation liability. Our GFT series speed reducers can meet replacement of original Bosch-Rexroth standards.
Their principal features and most significant advantages are:
• Compact dimensions, space-saving, two/ three-stage planetary gear design
• Modular design of gear unit
• Robust bearing system absorbing the forces exerted by the ring gear
• Simple mounting and ease of maintenance
• High performance
• Long operation life
• Integrated multiple-disk holding brake
• Low-noise running
Tuesday, September 6, 2011
Rectangular Reducer
Hypoid Gear Reducer Motor.With high efficiency and big torque.Our factory is specialist for electric motor production.
Hypoid Gear Reducer Motor ,
1.Energy-efficient
2.High strength
3.Easy installation
4.Output hollow:12mm-32mm
5.Power:15W-750W
6.CE and CCC approval
Hypoid Gear Reducer Motor ,
1.Energy-efficient
2.High strength
3.Easy installation
4.Output hollow:12mm-32mm
5.Power:15W-750W
6.CE and CCC approval
WD(S )2 series worm gear reducer with cylindical worm
Our company can supply cylindical worm screw reducer.WD(S)2 series.
Our company can supply cylindical worm screw reducer.WD(S)2 series.
The WD2 and WS2 worm reducer are the improved products of Q/ZB125-73WD and WS reducer. The products are well-knitted strcture with small volume,light,high efficiency and fine radiating arameter. The actuating temperature is 0°C~45°C and the right,inverse direction are allowed for high speed for high speed axle. The worm wheeling speed is no more than 1500r/min. They are widely used in minging ,metallurgy and craning department.
Our company can supply cylindical worm screw reducer.WD(S)2 series.
The WD2 and WS2 worm reducer are the improved products of Q/ZB125-73WD and WS reducer. The products are well-knitted strcture with small volume,light,high efficiency and fine radiating arameter. The actuating temperature is 0°C~45°C and the right,inverse direction are allowed for high speed for high speed axle. The worm wheeling speed is no more than 1500r/min. They are widely used in minging ,metallurgy and craning department.
extrusion gearbox
extrusion gearbox:model of ZLYJ146,screw diameter is 55mm
extrusion gearbox:model of ZLYJ146
Model
ZLYJ 146
Allowable input power(kw)
22.4
Output torque(N.m)
1428
Allowable output shaft axial thrust(KN)
60
Screw diameter(mm)
55
Input power(kw)
11
Input speed(rpm)
900
Output speed(rpm)
100
Weight(kg)
190
Standard ratio is 10:1,if you need special one,we can produce as your request.
extrusion gearbox:model of ZLYJ146
Model
ZLYJ 146
Allowable input power(kw)
22.4
Output torque(N.m)
1428
Allowable output shaft axial thrust(KN)
60
Screw diameter(mm)
55
Input power(kw)
11
Input speed(rpm)
900
Output speed(rpm)
100
Weight(kg)
190
Standard ratio is 10:1,if you need special one,we can produce as your request.
Marine Gearbox A300
With 10 degrees inclination
Compact designing with high torque
Punctual delivery and competitive price
Ratio
Trans.Capacity/Rate
(HP/RPM)
1.50, 2.00, 2.57, 2.95
0.34
Control Type
Electrical or Mechanical
Transmission
3 shafts with 5 helical gears
Rated Propeller Thrust (KN)
40.0
inclination
10°
Time for Reversing (s)
≤10
Max. Oil Temp. (°C)
≤80
Rec. Engine:
KTA 19-M600, CAT3412T, TBD234V12
* This model is for LIGHT DUTY-HIGH SPEED craft
* Available for us to DESIGN SOLUTIONS for propulsion system, like engine with gearbox or gearbox with shafting and propeller, etc
* All products available approved by ABS,BV,CCS,DNV,GL,LR,NK,etc., Certificated of Quality System ISO9001:20001
* More info about your ship is necessary for us to help to confirm the exact model
Compact designing with high torque
Punctual delivery and competitive price
Ratio
Trans.Capacity/Rate
(HP/RPM)
1.50, 2.00, 2.57, 2.95
0.34
Control Type
Electrical or Mechanical
Transmission
3 shafts with 5 helical gears
Rated Propeller Thrust (KN)
40.0
inclination
10°
Time for Reversing (s)
≤10
Max. Oil Temp. (°C)
≤80
Rec. Engine:
KTA 19-M600, CAT3412T, TBD234V12
* This model is for LIGHT DUTY-HIGH SPEED craft
* Available for us to DESIGN SOLUTIONS for propulsion system, like engine with gearbox or gearbox with shafting and propeller, etc
* All products available approved by ABS,BV,CCS,DNV,GL,LR,NK,etc., Certificated of Quality System ISO9001:20001
* More info about your ship is necessary for us to help to confirm the exact model
(Mercedes Benz Truck)Gear Box Transmission Part
Gear Box--Transmission Part. Made of Ductile Iron. By sand casting. CNC machined. For Mercedes Benz Truck
Representative transmission part product:
Transmission&Heavy Engineering&Auto Parts: engine block, front frame, rear frame, Arm axle, ,bearing stand, cylinder, brake disc rotor, coupling, bolster,frame, ring gear, mill-ball, hammer, jaw plate, bucket tooth, barre liner, grate, plate, rack, gears,sprockets,sheave/pulleys,fly wheels,shafts,flanges,housings, Gearbox, Speed Reducer, torque converter parts, Differential spares, final drive and brakes (wet and dry), etc
Representative transmission part product:
Transmission&Heavy Engineering&Auto Parts: engine block, front frame, rear frame, Arm axle, ,bearing stand, cylinder, brake disc rotor, coupling, bolster,frame, ring gear, mill-ball, hammer, jaw plate, bucket tooth, barre liner, grate, plate, rack, gears,sprockets,sheave/pulleys,fly wheels,shafts,flanges,housings, Gearbox, Speed Reducer, torque converter parts, Differential spares, final drive and brakes (wet and dry), etc
Gearbox design as Flendar
Gearbox design as Flender,SEW . whichmade of high strength quality alloy steel
Bevel helical bevel gearbox: 1.It has solid shaft output, hollow shaft output and contract disk hollow shaft output,which can be installed horizontally , vertically . It is made of high strength quality alloy steel through quenching and possesses high efficiency and long life gear .Othermore, it can bear large axial and radial load. Features is low in run noise, high in reliability, compact and so on.
2.The housing of one size can realize parallel shaft,right-angle shaft modes and horizontal,vertical mounting modes.Variety of components is reducible, the number of reducer's mode is augmentable.
3.Sound-absorbable structure, lager surface, big fan reduce temperature and noise, advanced grinding process of cylindrical gear and bevel gear improve stability and tr ansmit power more efficeintly.
4.Input mode : motor connected flange ,shaft input.
Output mode: solid shaft with flat key, hollow shaft with flat key, hollow shaft with shrink disk, hollow or solid shaft with involute splines , solid shaft with flange.
5.Mounting mode: Foot-mounted, flange-mounted, swing base-mounted, torque-arm-mounted.
H.B. (P.V.)series include sizes 3-26, number of stages is 1-4,ratio is 1.25-450. Combining with CR,S and K series, ratio will be higher.
Bevel helical bevel gearbox: 1.It has solid shaft output, hollow shaft output and contract disk hollow shaft output,which can be installed horizontally , vertically . It is made of high strength quality alloy steel through quenching and possesses high efficiency and long life gear .Othermore, it can bear large axial and radial load. Features is low in run noise, high in reliability, compact and so on.
2.The housing of one size can realize parallel shaft,right-angle shaft modes and horizontal,vertical mounting modes.Variety of components is reducible, the number of reducer's mode is augmentable.
3.Sound-absorbable structure, lager surface, big fan reduce temperature and noise, advanced grinding process of cylindrical gear and bevel gear improve stability and tr ansmit power more efficeintly.
4.Input mode : motor connected flange ,shaft input.
Output mode: solid shaft with flat key, hollow shaft with flat key, hollow shaft with shrink disk, hollow or solid shaft with involute splines , solid shaft with flange.
5.Mounting mode: Foot-mounted, flange-mounted, swing base-mounted, torque-arm-mounted.
H.B. (P.V.)series include sizes 3-26, number of stages is 1-4,ratio is 1.25-450. Combining with CR,S and K series, ratio will be higher.
bevel helical gearbox
bevel-Helical speed reducer gearbox design as Flender,which made of high strength alloy steel through quenching.
Helical gearbox:1.It has solid shaft output, hollow shaft output and contract disk hollow shaft output,which can be installed horizontally , vertically . It is made of high strength quality alloy steel through quenching and possesses high efficiency and long life gear .Othermore, it can bear large axial and radial load. Features is low in run noise, high in reliability, compact and so on.
2.The housing of one size can realize parallel shaft,right-angle shaft modes and horizontal,vertical mounting modes.Variety of components is reducible, the number of reducer's mode is augmentable.
3.Sound-absorbable structure, lager surface, big fan reduce temperature and noise, advanced grinding process of cylindrical gear and bevel gear im prove stability and transmit power more efficeintly.
4.Input mode : motor connected flange ,shaft input.
Output mode: solid shaft with flat key, hollow shaft with flat key, hollow shaft with shrink disk, hollow or solid shaft with involute splines , solid shaft with flange.
5.Mounting mode: Foot-mounted, flange-mounted, swing base-mounted, torque-arm-mounted.
H.B. (P.V.)series include sizes 3-26, number of stages is 1-4,ratio is 1.25-450. Combining with CR,S and K series, ratio will be higher.
Helical gearbox:1.It has solid shaft output, hollow shaft output and contract disk hollow shaft output,which can be installed horizontally , vertically . It is made of high strength quality alloy steel through quenching and possesses high efficiency and long life gear .Othermore, it can bear large axial and radial load. Features is low in run noise, high in reliability, compact and so on.
2.The housing of one size can realize parallel shaft,right-angle shaft modes and horizontal,vertical mounting modes.Variety of components is reducible, the number of reducer's mode is augmentable.
3.Sound-absorbable structure, lager surface, big fan reduce temperature and noise, advanced grinding process of cylindrical gear and bevel gear im prove stability and transmit power more efficeintly.
4.Input mode : motor connected flange ,shaft input.
Output mode: solid shaft with flat key, hollow shaft with flat key, hollow shaft with shrink disk, hollow or solid shaft with involute splines , solid shaft with flange.
5.Mounting mode: Foot-mounted, flange-mounted, swing base-mounted, torque-arm-mounted.
H.B. (P.V.)series include sizes 3-26, number of stages is 1-4,ratio is 1.25-450. Combining with CR,S and K series, ratio will be higher.
Gearmotor
1.CE ISO9001 certification
2.export in EU Americal
3.20years'experience in gearbox feild
4.maximum utilization of housing
Key Specifications/Special Features:
1. Small off-center output and compact structure
2. Maximum utilization of housing space
3. Integral casting housing with good rigidity to
enhance the shaft strength and service life of bearing
4. Types of installation and output base
5. Big or small flange type installation and output
through solid shaft
6. Input types: Couple-type motor, input through shaft
and input through coupling flange
7. Speed reducing ratio:
8. Two-stage: 5-24.8
9. Three-stage: 27.2-264
10. Average efficiency: 96%
11. Two-stage: 96%
12. Three-stage: 94%
2.export in EU Americal
3.20years'experience in gearbox feild
4.maximum utilization of housing
Key Specifications/Special Features:
1. Small off-center output and compact structure
2. Maximum utilization of housing space
3. Integral casting housing with good rigidity to
enhance the shaft strength and service life of bearing
4. Types of installation and output base
5. Big or small flange type installation and output
through solid shaft
6. Input types: Couple-type motor, input through shaft
and input through coupling flange
7. Speed reducing ratio:
8. Two-stage: 5-24.8
9. Three-stage: 27.2-264
10. Average efficiency: 96%
11. Two-stage: 96%
12. Three-stage: 94%
SCW series reducer gearbox with shaft round cylinder worm
Our company can supply shaft round cylinder worm reducer(SCW series).
Our company can supply shaft round cylinder worm reducer(SCW series),include SCWU/SCWS/SCWO/SCWV1.
The round grinding wheel enveloping(ZC1) cylinder worm is applied in this shaft round cylinder worm reducer. The tooth of worm gear and worm is conjugated. It is wide applied in etallurgy,lifting,transportation,chemical,mining and light industry. The power rangs from 0.59-75.84kw, the output torque locates between180-7077N.m. The input rotaing speed is no more than 1500r/min. The ambient tempetature is -40°C~+40°C.The inbricating oil must be heated up 0°C if the 0°C.
Our company can supply shaft round cylinder worm reducer(SCW series),include SCWU/SCWS/SCWO/SCWV1.
The round grinding wheel enveloping(ZC1) cylinder worm is applied in this shaft round cylinder worm reducer. The tooth of worm gear and worm is conjugated. It is wide applied in etallurgy,lifting,transportation,chemical,mining and light industry. The power rangs from 0.59-75.84kw, the output torque locates between180-7077N.m. The input rotaing speed is no more than 1500r/min. The ambient tempetature is -40°C~+40°C.The inbricating oil must be heated up 0°C if the 0°C.
Sunday, September 4, 2011
TR Rigid Tooth Flank Helical Gear Box
TR series rigid tooth flank helical gear units have such outstanding characters as small size and large transmission torque.
High rigid cast iron housing with ribs. The rigid tooth flank gear adopts high-quality alloy steel, and is hardened with carburizing and quenching treatment and refined by grinding. Smooth drive, low noise, large load capacity and long service life.
High rigid cast iron housing with ribs. The rigid tooth flank gear adopts high-quality alloy steel, and is hardened with carburizing and quenching treatment and refined by grinding. Smooth drive, low noise, large load capacity and long service life.
marine gearbox (WHL)
Mudpump gear box in the cabin
1.With the same center and steering
2.Ability to pass larger
3.Hydraulic control
4.With cluth
This type of
gear boxes
,
generally used in
engineering ship
(cutter suction, or suction),
the multidisc wet clutch with
hydraulic control structures
,
through the
clutch hydraulic
system control and off the access row row,
its transmission
capacity
,
with a
clutch
deceleration function,
input and output with
the same
Center and Steering.
Our company can also undertake
supporting shaft
(cabin).
WHL clutch reduction gear box Selection Table
Model
MEET
Reduction ratio
Weight(kg)
Input transmission capacity
KW/rpm)
Input power
KW)
WHL3000
≤3.39
≤2374
2:1
~5500
WHL3300
≤4.508
≤2990
2:1
~6500
WHL4500
≤5.899
≤3313
2:1
~8000
WHL5800
≤7.38
≤4136
2:1
~12000
WHL7200
≤11.3
≤5580
2:1
~17000
WHL8200
≤14.7
≤6450
2:1
~25000
1.With the same center and steering
2.Ability to pass larger
3.Hydraulic control
4.With cluth
This type of
gear boxes
,
generally used in
engineering ship
(cutter suction, or suction),
the multidisc wet clutch with
hydraulic control structures
,
through the
clutch hydraulic
system control and off the access row row,
its transmission
capacity
,
with a
clutch
deceleration function,
input and output with
the same
Center and Steering.
Our company can also undertake
supporting shaft
(cabin).
WHL clutch reduction gear box Selection Table
Model
MEET
Reduction ratio
Weight(kg)
Input transmission capacity
KW/rpm)
Input power
KW)
WHL3000
≤3.39
≤2374
2:1
~5500
WHL3300
≤4.508
≤2990
2:1
~6500
WHL4500
≤5.899
≤3313
2:1
~8000
WHL5800
≤7.38
≤4136
2:1
~12000
WHL7200
≤11.3
≤5580
2:1
~17000
WHL8200
≤14.7
≤6450
2:1
~25000
marine gearbox
marine gearbox: model of WL600series:352HP-740HP
Marine gearbox:
Model:WL600/WLD600/WLT600
1. Power/Rated Speed(kw/rpm): 480/1000---1088/2100(WL600)
480/1000---1088/2100(WLD600)
440/1000---924/2100(WLT600)
2. Reduction ratio: 2:1---4:1(WL600)
4:1----6:1(WLD600)
6:1---9.5:1(WLT600)
3. Transmision capacity(kw/min-1): 0.478---0.404(WL600)
0.478----0.404(WLD600)
0.44---0.28(WLT600)
4. Center distance(mm): 320(WL600)
415(WLD600)
415(WLT600)
5. N/W(kg): 1300(WL600)
1550(WLD600)
1600(WLT600)
6. Matched engine: KTA38-M1045,6N165 CAT3508B,TBD604BY8(WL600)
KTA38-M104, 6N165 CAT3508B,TBD604BY8 (WLD600)
KTA38-M940,TBD234V16,CAT3508B(WLT600)
Marine gearbox:
Model:WL600/WLD600/WLT600
1. Power/Rated Speed(kw/rpm): 480/1000---1088/2100(WL600)
480/1000---1088/2100(WLD600)
440/1000---924/2100(WLT600)
2. Reduction ratio: 2:1---4:1(WL600)
4:1----6:1(WLD600)
6:1---9.5:1(WLT600)
3. Transmision capacity(kw/min-1): 0.478---0.404(WL600)
0.478----0.404(WLD600)
0.44---0.28(WLT600)
4. Center distance(mm): 320(WL600)
415(WLD600)
415(WLT600)
5. N/W(kg): 1300(WL600)
1550(WLD600)
1600(WLT600)
6. Matched engine: KTA38-M1045,6N165 CAT3508B,TBD604BY8(WL600)
KTA38-M104, 6N165 CAT3508B,TBD604BY8 (WLD600)
KTA38-M940,TBD234V16,CAT3508B(WLT600)
NMRV075 worm gear reducer
1:High quality
2:die casting aluminum alloy housing
3:suitable for universal mounting
(gear box)(worm reducer)(worm gear box)
Characteristic:
1:high quality Aluminum case
2:efficent radiator, high carrying ability
3:small size, constriction compact, lightweight, and save place for mounting
4:high reliability and high effiliency
(gear box)(worm reducer)(worm gear box)
Sign example:
A NRV050-VS-50 B8
Reducer model 050, with input shaft and worm extensional shaft, ratio 50, mounting position B8.
B NMRV075-F1-20-Y-1.5 B3
Reducer model 075, motor power 1.5kw, with F1 output flange, transmission ratio 20, mouting position B8.
C NMRV110-AS-25-Y2.2 B6
Reducer model 110, motor power 2.2KW, with additional single output shaft output shaft, transmission ratio 25, mounting posit ion B6.
Permitted output torque:
Ratio
030
040
050
063
075
090
110
130
7.5
18
40
71
128
185
290
480
750
10
18
40
72
130
195
310
520
820
15
18
40
74
140
200
360
570
920
20
18
39
73
135
210
355
560
910
25
21
38
70
130
200
340
590
930
30
20
45
84
160
230
410
630
1040
40
18
41
76
145
220
360
610
1050
50
17
39
73
135
210
340
600
980
60
16
36
68
130
200
320
560
900
80
13
33
65
122
190
285
490
840
100
29
55
118
180
270
460
740
2:die casting aluminum alloy housing
3:suitable for universal mounting
(gear box)(worm reducer)(worm gear box)
Characteristic:
1:high quality Aluminum case
2:efficent radiator, high carrying ability
3:small size, constriction compact, lightweight, and save place for mounting
4:high reliability and high effiliency
(gear box)(worm reducer)(worm gear box)
Sign example:
A NRV050-VS-50 B8
Reducer model 050, with input shaft and worm extensional shaft, ratio 50, mounting position B8.
B NMRV075-F1-20-Y-1.5 B3
Reducer model 075, motor power 1.5kw, with F1 output flange, transmission ratio 20, mouting position B8.
C NMRV110-AS-25-Y2.2 B6
Reducer model 110, motor power 2.2KW, with additional single output shaft output shaft, transmission ratio 25, mounting posit ion B6.
Permitted output torque:
Ratio
030
040
050
063
075
090
110
130
7.5
18
40
71
128
185
290
480
750
10
18
40
72
130
195
310
520
820
15
18
40
74
140
200
360
570
920
20
18
39
73
135
210
355
560
910
25
21
38
70
130
200
340
590
930
30
20
45
84
160
230
410
630
1040
40
18
41
76
145
220
360
610
1050
50
17
39
73
135
210
340
600
980
60
16
36
68
130
200
320
560
900
80
13
33
65
122
190
285
490
840
100
29
55
118
180
270
460
740
marine gearbox,gearbox
marine gearbox,gearbox:the products have passed the ISO9001:2000
Marine gearbox:
Model:WL600/WLD600/WLT600
1. Power/Rated Speed(kw/rpm): 480/1000---1088/2100(WL600)
480/1000---1088/2100(WLD600)
440/1000---924/2100(WLT600)
2. Reduction ratio: 2:1---4:1(WL600)
4:1----6:1(WLD600)
6:1---9.5:1(WLT600)
3. Transmision capacity(kw/min-1): 0.478---0.404(WL600)
0.478---0.404(WLD600)
0.44---0.28(WLT600)
4. Center distance(mm): 320(WL600)
415(WLD600)
415(WLT600)
5. N/W(kg): 1300(WL600)
1550(WLD600)
1600(WLT600)
6. Matched engine: KTA38-M1045,6N165 CAT3508B,TBD604BY8(WL600)
KTA38-M104, 6N165 CAT3508B,TBD604BY8 (WLD600)
KTA38-M940,TBD234V16,CAT3508B(WLT600)
Marine gearbox:
Model:WL600/WLD600/WLT600
1. Power/Rated Speed(kw/rpm): 480/1000---1088/2100(WL600)
480/1000---1088/2100(WLD600)
440/1000---924/2100(WLT600)
2. Reduction ratio: 2:1---4:1(WL600)
4:1----6:1(WLD600)
6:1---9.5:1(WLT600)
3. Transmision capacity(kw/min-1): 0.478---0.404(WL600)
0.478---0.404(WLD600)
0.44---0.28(WLT600)
4. Center distance(mm): 320(WL600)
415(WLD600)
415(WLT600)
5. N/W(kg): 1300(WL600)
1550(WLD600)
1600(WLT600)
6. Matched engine: KTA38-M1045,6N165 CAT3508B,TBD604BY8(WL600)
KTA38-M104, 6N165 CAT3508B,TBD604BY8 (WLD600)
KTA38-M940,TBD234V16,CAT3508B(WLT600)
Type 16A Marine Gearbox
Type 16A marine gearbox is manufactured by us.It is of good quality,after-sale service and competitive price.
Type16A marine gearboxes are the series products manufactured by us. They are a kind of mechanically operated power transmission unit designed for small crafts. They're simple in construction, easy of assembling and disassembling, and convenient for maintenance. They can perform the duties of ahead and astern drives. Clutching and declutching, as well as the reduction of speed.
The type16A Marine Gearbox has a rated transmission power of 0.0118kW/( r
*
min
-1
)(0.006 hp/( r
*
min
-1
)) and is appropriated to be installed on Model 2105,2100,395,295, Marine Diesel Engine. They may also be coupled with other diesel Engine of equivalent shaft torque so as to form a complete marine power unit, which is fit for use on small riverboats or coasters, or an the communication boats or lifeboats carried by large ships.
16A Marine gearbox
Power/speed(kw/rpm):6/1000-24/2100
Ratio(i)
2.07 2.48 2.95 3.35 3.83
Rate(kw/rpm)
0.012
Type16A marine gearboxes are the series products manufactured by us. They are a kind of mechanically operated power transmission unit designed for small crafts. They're simple in construction, easy of assembling and disassembling, and convenient for maintenance. They can perform the duties of ahead and astern drives. Clutching and declutching, as well as the reduction of speed.
The type16A Marine Gearbox has a rated transmission power of 0.0118kW/( r
*
min
-1
)(0.006 hp/( r
*
min
-1
)) and is appropriated to be installed on Model 2105,2100,395,295, Marine Diesel Engine. They may also be coupled with other diesel Engine of equivalent shaft torque so as to form a complete marine power unit, which is fit for use on small riverboats or coasters, or an the communication boats or lifeboats carried by large ships.
16A Marine gearbox
Power/speed(kw/rpm):6/1000-24/2100
Ratio(i)
2.07 2.48 2.95 3.35 3.83
Rate(kw/rpm)
0.012
RC gearmotor
Helical gearmotor (Geared Motor ,gearbox):
1.high mechanical efficiency;
2.low noise;
3.long life-span;
4.compact structure.
Advantages of Helical gearmotor (Geared Motor ,gearbox):
1. High mechanical efficiency:
94%-98%
(depends on the transmission steps);
2. Input form: flange input,
direct motor input
, shaft input;
3. Materials of geared motor body:
HT250
high-strength cast iron;
4. Materials of shafts:
42CrMo
alloy steel;
5. Materials of gears :
20CrMnTi
alloy steel;
6. Heat treatment: tempering, cementiting, quenching;
7. Surface hardness of gears:
HRC58°-62 °
;
8. Maching precision of gears:
6-5GRADE
;
9. Brand of bearings: HRB, LYC,ZWZ,NSK;
10. Noise of geared motor:
60-68dB;
11. Gear lubrication oil: Mineral oil or Synthetic o il.
1.high mechanical efficiency;
2.low noise;
3.long life-span;
4.compact structure.
Advantages of Helical gearmotor (Geared Motor ,gearbox):
1. High mechanical efficiency:
94%-98%
(depends on the transmission steps);
2. Input form: flange input,
direct motor input
, shaft input;
3. Materials of geared motor body:
HT250
high-strength cast iron;
4. Materials of shafts:
42CrMo
alloy steel;
5. Materials of gears :
20CrMnTi
alloy steel;
6. Heat treatment: tempering, cementiting, quenching;
7. Surface hardness of gears:
HRC58°-62 °
;
8. Maching precision of gears:
6-5GRADE
;
9. Brand of bearings: HRB, LYC,ZWZ,NSK;
10. Noise of geared motor:
60-68dB;
11. Gear lubrication oil: Mineral oil or Synthetic o il.
Planetary Gearbox
Main specifications:
1) Ratio: 3:1/ 4:1 /5:1/8:1 to 320:1/512:1
2) Nominal output torque: 80 - 260Nm
3) Max. radial force: 2
Main specifications:
1) Ratio: 3:1/ 4:1 /5:1/8:1 to 320:1/512:1
2) Nominal output torque: 80 - 260N.m
3) Max. radial force: 2,000N
4) Max. axial force: 2,800N
1) Ratio: 3:1/ 4:1 /5:1/8:1 to 320:1/512:1
2) Nominal output torque: 80 - 260Nm
3) Max. radial force: 2
Main specifications:
1) Ratio: 3:1/ 4:1 /5:1/8:1 to 320:1/512:1
2) Nominal output torque: 80 - 260N.m
3) Max. radial force: 2,000N
4) Max. axial force: 2,800N
HK (A F)37 helical-bevel reducer
1:Out-put shaft is vertical with the in-put shaft
2:All purpose use,high efficiency
(reducer)(gear box)(helical gearbox)
Generallntroduction of HK series:
reducer)(gear box)(helical gearbox)
The HK series gear units, are novel transmission device and composed of Y series motor, helical gear,Gelisen arc gear and worm gear. The gears are made of high wear-resisting alloy materials, specially and finely processed.
Advantages:
1:Compact design, small volume, nice appearance ,and strong capacity of being overloaded.
2:Precise division and wide selection for transmission ratio.
3:The efficiency is up to as high as 96% with low energy consumption, strong adaptability and is capable of working continually in corrosive or damp environment.
4:All- purpose use, convenient and low-cost ma intenance.
5:New seal device, strong adaptability.
6:The HK Series can match with general Y series motor, Y2 series motor, overload motor, Brake motor, frequency conversion motor,DC motor, outdoor special purpose motor.
7:Varied range of motor combinations, mouting positions and struture projects.
Tips:
More details, pls contact us freely.
2:All purpose use,high efficiency
(reducer)(gear box)(helical gearbox)
Generallntroduction of HK series:
reducer)(gear box)(helical gearbox)
The HK series gear units, are novel transmission device and composed of Y series motor, helical gear,Gelisen arc gear and worm gear. The gears are made of high wear-resisting alloy materials, specially and finely processed.
Advantages:
1:Compact design, small volume, nice appearance ,and strong capacity of being overloaded.
2:Precise division and wide selection for transmission ratio.
3:The efficiency is up to as high as 96% with low energy consumption, strong adaptability and is capable of working continually in corrosive or damp environment.
4:All- purpose use, convenient and low-cost ma intenance.
5:New seal device, strong adaptability.
6:The HK Series can match with general Y series motor, Y2 series motor, overload motor, Brake motor, frequency conversion motor,DC motor, outdoor special purpose motor.
7:Varied range of motor combinations, mouting positions and struture projects.
Tips:
More details, pls contact us freely.
gearbox DCYK
speed reducer
gearbox (DCYK)
Quality Management System is in conformity with GB/T19001-2000-ISO9001:2000 standard.
speed reducer
gearbox (DCYK)
Quality Management System is in conformity with GB/T19001-2000-ISO9001:2000 standard.
Model:
DCY160 DCY180 DCY200 DCY224 DCY250 DCY280 DCY315 DCY355 DCY400 DCY450 DCY500 DCY560 DCY630 DCY710 DCY800
gearbox (DCYK)
Quality Management System is in conformity with GB/T19001-2000-ISO9001:2000 standard.
speed reducer
gearbox (DCYK)
Quality Management System is in conformity with GB/T19001-2000-ISO9001:2000 standard.
Model:
DCY160 DCY180 DCY200 DCY224 DCY250 DCY280 DCY315 DCY355 DCY400 DCY450 DCY500 DCY560 DCY630 DCY710 DCY800
Subscribe to:
Comments (Atom)